Electrical Rewiring in Portland, OR

Home Rewiring Services in Portland

Your home's wiring works behind the walls every day. Over time, wires age, wear out, and fall behind modern needs. Old wiring can overheat and raise the risk of a fire. Rewiring replaces worn or unsafe wiring with new wiring that meets today's codes.

Sunset has served Portland homeowners since 1922. Our licensed electricians rewire single rooms, add new circuits, and update whole homes. We work across Portland, Beaverton, Hillsboro, Tigard, Lake Oswego, and Milwaukie. Rewiring is one of the many electrical services we offer.

Signs Your Home Needs Rewiring

Wiring problems often show small warning signs first. Call an electrician if you notice any of these.

Lights that flicker or dim often
Breakers that trip again and again
Outlets or switch plates that feel warm
A burning smell near outlets or the panel
Buzzing sounds from switches or outlets
Two prong outlets throughout the home
Scorch marks around outlets

Do not ignore these signs. They can point to loose connections or overloaded wiring. A quick inspection can tell you what is going on.

Older Portland Homes and Outdated Wiring

Portland has many charming older homes. Some still have knob and tube wiring or old cloth covered wiring. These systems cannot safely handle today's electrical loads. Many also lack a ground wire. Our team can check your wiring and tell you what needs to change. We explain what is urgent and what can wait.

Modern Homes With Modern Needs

Today's homes use far more power than homes of the past. Big TVs, computers, and kitchen gadgets all draw power. Many families also add EV chargers, hot tubs, or home offices. Old wiring may not keep up with all that demand. New wiring gives you the capacity to grow.

Partial Rewiring vs. Whole Home Rewiring

Not every home needs a full rewire. We help you choose the right scope for your home and budget.

Partial Rewiring

A partial rewire updates one part of your home. It works well for a kitchen remodel, a new addition, or one problem area. We can also add dedicated circuits for large appliances. Partial work is a smart way to fix the worst problems first. You can plan more updates over time.

Whole Home Rewiring

A whole home rewire replaces most or all of the wiring. It makes sense when the wiring is old, damaged, or unsafe throughout. It often pairs with an electrical panel upgrade so your home can handle more power.

Limited-Time Offers

Electrical

$500 Off New Electrical Panel

Schedule

General

25% Off Rain Drain Cleaning

Schedule

Plumbing

Up to $500 Off - Whole Home Water Repipe

Schedule

General

Up to $500 Off - Whole Home Attic Insulation

Schedule

Rewiring for Remodels and Additions

A remodel is one of the best times to update your wiring. The walls are often open, so access is easier. That can save time and limit extra repairs later.
Kitchens and bathrooms need special care. These rooms often need dedicated circuits and GFCI outlets near water. A new addition also needs safe wiring that ties into your panel. We work with your plans so the electrical work fits your project from the start.
Planning ahead also helps you avoid surprises. We can add outlets where you will use them most. We can also plan lighting circuits for each room. Good planning now means fewer extension cords and power strips later.

Our Electrical Rewiring Process

We follow a clear process on every rewiring job. It keeps your home safe and the work on track.

Inspection

First, our electrician inspects your panel, wiring, and outlets. We look for damage, overloads, and code issues. We also ask how you use power in your home today.

Clear Plan and Upfront Pricing

Next, we explain what we found in plain words. We share your options and give you upfront pricing before work begins. You stay in control of every decision.

Careful Installation

Our team runs the new wiring with care for your home. We work to limit wall openings and keep your space clean. We also update switches and outlets as needed.

Testing and Final Check

Finally, we test every circuit. We make sure each outlet, switch, and fixture works safely. We do not leave until the job is done right.

Electrical Safety Tips Before Your Rewire

Your home may need to wait a little while before the rewire begins. These simple steps help keep your family safe in the meantime.

Do not overload outlets or power strips.
Unplug space heaters and large appliances when not in use.
Replace any cracked or loose outlet covers.
Keep cords out from under rugs and furniture.
Test your smoke alarms each month.

If you see sparks, smell burning, or find a hot outlet, stop using that circuit. Turn it off at the breaker and call an electrician right away.

Why Choose Sunset for Rewiring

Homeowners trust Sunset for safe, careful electrical work. We treat your home with respect and explain each step. Here are a few more reasons why.

Licensed and certified electricians
More than 100 years of local service
Honest, flat rate pricing
24/7 live answering

New wiring is a great time to protect your electronics too. Ask about whole home surge protection during your project. Call us at 503-500-5866 to schedule a wiring inspection.

Frequently Asked Questions about Electrical Rewiring in Portland, OR

How do I know if my home needs rewiring?

Flickering lights, warm outlets, and frequent breaker trips are common signs. Homes with knob and tube or cloth covered wiring often need updates too. Our electricians can inspect your wiring and give you an honest answer.

How long does it take to rewire a house?

Timing depends on the size of your home and the scope of work. A single room takes far less time than a whole home. We give you a clear timeline before we start.

Can I stay in my home during rewiring?

Often, yes. We plan the work to limit the time you go without power. We explain what to expect before we begin.

What if I only have one problem circuit?

You may not need a full rewire. Our electrical repair team can fix many single circuit problems. We will tell you if a bigger update makes more sense.

Why do my breakers keep tripping?

A tripping breaker often means a circuit carries too much load. It can also point to a short or a worn breaker. Learn more about our circuit breaker services. Frequent trips are a clear sign to call an electrician.

Financing Options Available

Don’t put your home comfort on hold while you save up. Sunset HVAC has flexible financing options to get the service you need now, subject to credit approval. Apply today and breathe easy.

100 Years in Business

Home of the 100% money back guarantee and 0% financing

For over 100 years, Sunset has provided trusted heating and cooling solutions throughout the Portland area, keeping families and businesses comfortable in every season. Built on a foundation of service, innovation, and community dedication, we continue to lead the industry with unwavering commitment to quality and integrity.